Spanjaard Engineering Marking Blue is a clear dark blue engineering marking dye. It dries rapidly to form a non-flaking, non-glaring water resistant coating.

Applications

The fast drying blue liquid or spray is a lay-out ink used for coating onto metal surfaces and then precision scribing on the dried surface with a sharp point. Spanjaard Engineering Marking Blue can also be used for locating high spots on bearings and other finished metal surfaces.

Application Instruction

- Ensure good ventilation.

- Ensure metal surface is thoroughly cleaned.

- Spray evenly onto surface from a distance of 20cm.

- Allow to dry and mark as required.

- Spanjaard Engineering Marking Blue is easily removed with any petroleum based solvent.

Typical Properties

TYPICAL PROPERTIES	SPANJAARD ENGINEERING MARKING BLUE
Colour	Dark blue
Density @20 °C, g/ml	1.28

Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei