Electrical Insulating Varnish Spray - Spanjaard Malaysia
Category: Electrical Insulating Varnish
Specifications
Density at 20 Degree Celsius, g/cm3
0.961
Flash point, PMCC, Degree Celcius (D-93)
5
Di-electric strength (IEC 156) @ 25 Degree Celcius, volts/mil
1700-1900
Di-electric strength (IEC 156) @ 25Degree Celcius,KV/mm
67-74
Di-electric constant @ 25 Degree Celcius (D-150)
2.9-3.4
Surface resistivity ohms/cm2(D257)
1x10 power of 14
Volume resistivity Ohms/cm2 (D257)
1x10 power of 14
Moisture vapour transmission (E-96)
4-5
SKU
SPANJ-ELEC INSULAITN VARNISH
Details
Spanjaard Electrical Insulating Varnish is a red coloured, moisture and oil resistant varnish. It is an excellent insulating medium for use in a variety of industrial applications.
Application
- For use on all electrical windings, coils and motor frames.
- Protects against arcing from controller shafts, switch bases and other electrical equipment.
- Used as a sealant for pipes, gaskets, etc.
Application Instruction
1. Thoroughly degrease the component to be treated, preferably with a safety solvent, e.g. Spanjaard Electrical Motor Cleaner and allow to dry.
2. Shake the can vigorously until agitator/ball is freed.
3. Holding the can 25cm away from the object to be treated, apply one or more thin layers of product; allowing three minutes for each coat to dry.
Typical Properties
.png)
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei | TYPICAL PROPERTIES | SPANJAARD ELECTRICAL INSULATING VARNISH |
| Specific gravity @ 25°C | 0.961 |
| Flash point, PMCC, °C (D-93) | 5 |
| Di-electric strength (IEC 156) | |
| @ 25°C, volts/mil | 1700-1900 |
| @ 25°C, KV/mm | 67-74 |
| Di-electric constant | |
| @25°C (D-150) | 2.9 – 3.4 |
| Surface resistivity, ohms/cm2 (D257) | 1x1014 |
| Volume resistivity, ohms/cm2 (D257) | 1x1014 |
| Moisture vapour transmission (E-96) | 4 – 5 |
Contact our sales consultant in area:
View more about Electrical Insulating Varnish Spray - Spanjaard Malaysia on main site