Thermal Compound
 

KennTherm 9310

KennTherm 9310 Thermal Compound is a non-silicone grease and metal-free grease with very low thermal impedance and long-term stability. The proprietary- formulated thermal compound with appropriate viscosity and good consistency can be spread easily and evenly. It can be stored in room temperature without special treatment.

 

KennTherm 9310 serves as an effective thermal interface material for heat sink devices where efficient cooling as well as long-term stability is required.

 

Features

- Excellent performance

- Excellent long-term stability

- Non-corrosive

- No special requirements forstorage

- Easy to apply and less to use

- No “ burn-in” time required

- Low dry-out

- Not electrically conductive

Specification

Properties		Test Methods	Units	Typical value
Color				White
Consistency		ASTM D217		220
Specific Gravity		ASTM D1475	g/cm3	2.7
Viscosity		BrookField CVE #7 @12RPM	Cps	300K-500K
Thermal Properties
Thermal Conductivity		ASTM D5470	W/m-K	1.8
Thermal Impedance		ASTM D 5470	K-in2/W	0.024
Dry Out Test		240 hours at 363K	Weight%	0.03
Electrical Properties
Dielectric constant	298K@1000 Hz	ASTM D-150		10.66
	298K@100K Hz	ASTM D-150		7.74
Dissipation factor	298K@1000 Hz	ASTM D-150		0.25
	298K@100K Hz	ASTM D-150		0.05
Dielectric Strength		ASTM D-149	kV/mm	2

Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei